Attention! The content may be translated automatically, Transport Competence Agency is not responsible for the accuracy of the translation.
Šriftas
A A A
Fonas
Iliustracijos

FOR MAINTENANCE ORGANIZATIONS

Public Transport Competence Agency is the designated competent authority that performs the certification and supervision of maintenance organizations for aircraft and their components. Maintenance organizations can be certified according to:

  1. Regulation of the European Commission no. 1321/2014 “On the continuing airworthiness of aircraft and the suitability for use of aviation products, parts and devices and the approval of organizations and employees performing these tasks” Annex I (Part M) Subsection F;
  2. Regulation of the European Commission no. 1321/2014 “On the continuing airworthiness of aircraft and the suitability for use of aviation products, parts and devices and the approval of organizations and employees performing these tasks” Annex II (Part 145)
  3. By order of the Director of the Civil Aviation Administration no. 4R-63 approved maintenance requirements for civil aircraft used for non-commercial purposes.

Approval certificates issued in accordance with the standards specified in point 1 or 2 give organizations the right to perform maintenance work on aircraft/components for aircraft/components installed in the aircraft that are registered in the civil aircraft register of European Union member states or EASA member states.

Approval certificates issued to the standard specified in point 3 entitle organizations to perform maintenance work on aircraft/components for aircraft/components installed in the aircraft that are registered in the Republic of Lithuania.

  1. Regulation of the European Commission no. 1321/2014 “On the continued airworthiness of aircraft and the suitability for use of aviation products, parts and devices and the approval of organizations and employees performing these tasks”
  2. European Aviation Safety Agency (EASA) Explanatory Material and Acceptable Means of Compliance (AMC and GM)
  3. of the Minister of Transport of the Republic of Lithuania in 2003 November 6 order no. 3-615 ” On the approval of the rules for issuing certificates to design and manufacture civil aircraft and/or their components, as well as to carry out their technical maintenance “
  4. CAA Director in 2013 December 9 order no. 4R-273 ” On the approval of technical supervision organizations and the approval of the rules for their continuous supervision in accordance with the requirements of part 145 “
  5. CAA Director in 2004 April 19 order no. 4R-63 ” On approval of maintenance requirements for civil aircraft used for non-commercial purposes “
  6. Civil Aviation Administration 2018 January 12 order no. 4R-11 ” On the Director of the Civil Aviation Administration in 2015 April 16 order no. 4R-56 “On aircraft/component maintenance, aircraft airworthiness continuity management, assessment of qualification compliance of designated responsible personnel of aircraft maintenance training organizations”

The services of the Transport Competence Agency are paid for in advance – that is, before the service is provided – by indicating the name of the service and the payment code in the payment order.

Payment code Name of the service Salary amount, in euros
4.1.27. Category A training approval according to Regulation (EU)
No. 1321/2014 for an organization approved by Part F of Annex II (Part 145) or Annex I (Part M)
2,738
4.1.28. Category A training approved in accordance with Regulation (EU)
No. 1321/2014 Annex III (Part 66), Annex II (Part 145) or Annex I
(Part M) Subsection F, annual surveillance
602
4.1.29. maintenance organizations in accordance with Regulation (EU)
no. 1321/2014 the requirements of Annex II (Part 145) or Annex I (Part M) Subsection F of the requirements for the initial certification for the training of the internship at the workplace
1 862
4.1.30. internship training at the workplace, approved in accordance with Regulation (EU) no. 1321/2014 of Annex III (Part 66), Annex II (Part 145) or Annex I
(Part M) Subpart F for the organization, annual maintenance (for each aircraft type, category or subcategory)
602
4.1.31. internship training at the workplace according to Regulation (EU)
no. 1321/2014 approval of Part F of Annex III (Part 66), Annex II (Part 145) or Annex I
(Part M) for each aircraft type, category or subcategory
1 862
4.1.37. assessment of the acceptability of training in general knowledge of the aircraft type 219
4.1.38. the evaluation of the acceptability of the training of general knowledge of the aircraft type as a matter of urgency within 5 working days 438
4.21. for the approval of the maintenance organization and the issuance of the approval certificate of the maintenance organization and its supplement or the approval of the production organization and the issuance of the approval certificate of the production organization and its supplement:
4.21.1. when the company employs from 1 to 10 persons 1 148
4.21.2. when the company employs from 11 to 50 persons 2 072
4.21.3. when the company employs 51 or more persons 3,966
4.22. for the change of the approval certificate of the maintenance organization or its annex or the change of the approval certificate of the production organization or its annex when the scope of activity is increased:
4.22.1. when the company employs from 1 to 10 persons 567
4.22.2. when the company employs from 11 to 50 persons 1 023
4.22.3. when the company employs 51 or more persons 2 014
4.23. for the change of the approval certificate of the maintenance organization or its annex or the change of the approval certificate of the production organization or its annex, when the change is not related to an increase in the scope of activity 133
4.24. for the change of the approval certificate of the maintenance organization or its annex or the change of the approval certificate of the production organization or its annex, when the change is not related to the increase of the scope of activity, as a matter of urgency within 5 working days 266
4.25. for the annual maintenance of the maintenance organization or production organization:
4.25.1. when the company employs from 1 to 10 persons 890 (for each organization)
4.25.2. when the company employs from 11 to 50 persons 1 383

(for each organization)

4.25.3. when the company employs 51 or more persons 1 862

(for each organization)

4.26. for the oral evaluation of the professional experience and practical abilities of the responsible employee appointed to the position 146
4.27. for the oral evaluation of the professional experience and practical abilities of the responsible employee appointed to the position, in an urgent manner within 5 working days 292
4.28. for approval of the line station of the maintenance organization 825
4.29. for the approval of a new permit by the head of the approved maintenance organization or the head of the production organization, or the head of the airworthiness continuity management organization, or the head of the organization’s secondary procedures (without changing the approval certificate and its annex), when more than 50% have been changed according to the initial approval. manual section:
4.29.1. 0-50 p. 252
4.29.2. pp. 51-100 315
4.29.3. pp. 101-200 630
4.29.4. pp. 201-500 1 008
4.29.5. more than 500 p. 1,260
4.30. for the audit approval of the head of the approved maintenance organization or the head of the production organization, or the head of the airworthiness management organization, or the head of the secondary procedures of the organization (without changing the approval certificate and its annex):
4.30.1. 0-10 p. 60
4.30.2. 0-10 p. urgent order within 5 working days 120
4.30.3. pp. 11-25 120
4.30.4. pp. 11-25 urgent order within 5 working days 240
4.30.5. pp. 26-50 181
4.30.6. pp. 26-50 urgent order within 5 working days 362
4.30.7. pp. 51-100 241
4.30.8. pp. 51-100 urgent order within 5 working days 482
4.30.9. pp. 101-200 301
4.30.10. pp. 101-200 urgent order within 5 working days 602
4.30.11. pp. 201-500 422
4.30.12. pp. 201-500 urgent order within 5 working days 844
4.30.13. more than 500 p. 602
4.30.14. more than 500 p. urgent order within 5 working days 1 204
7.4. for the examination or re-examination (in writing) 37
7.5. for the examination or re-examination (in writing) of the qualification conformity assessment of the responsible employee appointed by the continuous suitability organizations in an urgent manner within 5 working days 74

Payment details:
VšĮ Transporto competencies agency
Company code 305598608
VAT payer code: LT100013737411
Account for aviation administrative services payments: LT757044090100659769
AB SEB, bank code 70440

Purpose of payment – it is necessary to indicate the name and code of the service.

Specific amounts of remuneration for the administrative services provided by the Public Enterprise Transport Competence Agency in 2020. October 26 confirmed by the Minister of Transport.